AudioChainsDB
Audio-Technica

AT875R

microphone

$169

Gebrauchtmarkt: $130*

Datenblatt des Herstellers

Technische Daten

2 von 9 Werten mit vermerkter Quelle
Connectors
XLR 3-Pin Male·
Has Built In ADC
no·
Self Noise d BA
20
Transducer Type
Condenser Electret
Sensitivity dBV
-30·
Output Impedance ohms
100·
Phantom Power Required
yes·
Connection Architecture
XLR-Only·
Updated At
2026-08-05T23:27:57.548Z·

Kommentar des Toningenieurs

Tonal Profile

A short shotgun cheap enough to bolt to a camera and forget: 90 Hz to 20 kHz, 80 g, and an 11-52 V phantom range that most on-camera recorders can actually supply. The 90 Hz bottom limit is not a filter, it is the microphone.

Gain Staging Advice

-30 dBV/Pa is loud for the money, but the derived 20 dB-A floor is 7 dB above an MKH 416: at boom distance in a quiet room you will hear the microphone before you hear the preamp.

Was im Datenblatt tatsächlich steht

Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.

Einheit nicht genannt
«SN比(1kHz at 1Pa、A特性) 74dB»

The AT875R sheet has no equivalent-noise-level row at all - the only noise figure is a signal-to-noise ratio referred to 1 Pa. Audio-Technica prints both rows on the AT4033a and the AT4050. Since the reference is named (1 Pa = 94 dB SPL) and the weighting is named (A特性), the missing figure follows exactly: 94 − 74 = 20 dB-A. That is the number stored here.

geprüft am 6.8.2026

* Geschätzt über das Abschreibungsmodell (~77% Restwert). · geprüft am 6.8.2026