Behringer
Ultra-DI DI400P
intermediate
$29
Gebrauchtmarkt: $25*
Technische Daten
3 von 7 Werten mit vermerkter Quelle- Type
- di_box·
- Added Gain dB
- -20✓
- Input Connector
- 2x 1/4" TS parallel in/out (unbalanced)·
- Output Connector
- 3-Pin XLR Male (balanced)·
- Expert Description
- En: Passive transformer DI, and one of the very few whose maker prints the actual insertion loss: "Level change (Input → Output): -20 dB". Impedance ratio 110:1, frequency response 40 Hz (-3 dB) to 20 kHz, THD+N 0.007% at 1 kHz with a +4 dBu input, ground lift switch, no power of any kind. · Uk: Пасивний трансформаторний DI — і один із дуже небагатьох, для яких виробник друкує справжні втрати вставки: «Level change (Input → Output): -20 dB». Коефіцієнт трансформації за опором 110:1, смуга від 40 Гц (-3 дБ) до 20 кГц, спотворення 0,007% на 1 кГц при вході +4 dBu, перемикач розриву землі, живлення не потребує.·
- Provides Phantom Power
- no✓
- Requires Phantom Power
- no✓
Kommentar des Toningenieurs
Gain Staging Advice
The published -20 dB and the published 110:1 impedance ratio agree with each other: a 110:1 impedance ratio is an 10.5:1 voltage ratio, that is -20.4 dB. It is rare to be able to check a DI's loss against its own second number, and here it checks out.
Production Warning
Passive: phantom power neither helps nor harms it. Level is recovered on the preamp behind it, which for a quiet passive pickup means running that preamp 20 dB higher than you otherwise would.
* Geschätzt über das Abschreibungsmodell (~86% Restwert). · geprüft am 5.8.2026