Behringer
DI600P
intermediate
$39
Gebrauchtmarkt: $30*
Technische Daten
2 von 7 Werten mit vermerkter Quelle- Type
- di_box·
- Added Gain dB
- -20✓
- Input Connector
- 1/4" TS (unbalanced) + parallel Thru·
- Output Connector
- 3-Pin XLR Male (balanced)·
- Expert Description
- En: A passive transformer DI whose manual publishes both halves of the same fact: a level change of -20 dB from input to output and an impedance ratio of 110:1. The two agree — an impedance ratio of 110:1 is a turns ratio of about 10.5:1, which is 20.4 dB of loss. It also carries a 30 dB INST/AMP pad for speaker-level use and a 7.5 kHz low-pass filter. · Uk: Пасивний трансформаторний директ-бокс, у посібнику якого надруковано обидві половини одного факту: зміна рівня від входу до виходу -20 дБ і коефіцієнт трансформації опору 110:1. Вони узгоджені: відношення опорів 110:1 — це відношення витків близько 10,5:1, тобто 20,4 дБ втрат. Є ще атенюатор INST/AMP на 30 дБ для роботи від виходу підсилювача й фільтр верхніх частот 7,5 кГц.·
- Requires Phantom Power
- no✓
- Updated At
- 2026-08-05T22:03:05.236Z·
Kommentar des Toningenieurs
Gain Staging Advice
Twenty decibels of loss is not a defect, it is the job: the box turns an instrument-level, high-impedance signal into a microphone-level, low-impedance one. Plan for the preamp to make those 20 dB back, and remember the INST/AMP switch removes another 30 dB on top.
Production Warning
Behringer publish the level change for this passive box but not for their active DIs; and the low-pass filter at 7.5 kHz is switchable, so a DI that sounds dull on a bright keyboard is usually a switch, not the transformer.
* Geschätzt über das Abschreibungsmodell (~77% Restwert). · geprüft am 5.8.2026