AudioChainsDB
Bowers & Wilkins

607 S3

speaker

$800

Gebrauchtmarkt: $575*

Datenblatt des Herstellers

Technische Daten

6 von 6 Werten mit vermerkter Quelle
System Type
Passive Bookshelf·
Input Terminals
Binding posts
Min Impedance Dip ohms
3
Nominal Impedance ohms
8
Recommended Power watts
Max Continuous: 100 · Min Continuous: 30
Sensitivity dB 2.83V 1m
84

Kommentar des Toningenieurs

Headroom Notes

84 dB at 2.83 Vrms / 1 m, on an 8-ohm nominal so also dB/W/m. That is 8 dB below the Klipsch in this batch — six times the amplifier power for the same level, before the impedance dip is even considered. The Continuum cone is heavy and well damped; the sensitivity is the price paid for that, and it is a deliberate trade rather than a defect.

Amplification Warning

The hardest combination in this batch: 84 dB sensitivity with a 3.0 Ω minimum. Low sensitivity means you need voltage, a 3-ohm dip means you need current, and a small AV receiver has neither in reserve. B&W's own recommended range starts at 30 W «into 8Ω», which is the wrong load to quote a minimum against — the speaker will be asking for that power at 3 ohms, where most amplifiers rated only into 8 ohms deliver it as clipping.

* Geschätzt über das Abschreibungsmodell (~72% Restwert). · geprüft am 5.8.2026