Oberon 3
speaker
$800
Gebrauchtmarkt: $575*
Technische Daten
5 von 5 Werten mit vermerkter QuelleKommentar des Toningenieurs
Headroom Notes
87 dB at 2.83 V / 1 m on a 6-ohm nominal converts to roughly 85.75 dB/W/m — the printed figure flatters it by about 1.25 dB against any 8-ohm rival quoted in the same 2.83 V scale. The 7-inch woofer in a compact standmount is doing the work here, and the wood-fibre cone is light for its size, which is where the sensitivity comes from.
Amplification Warning
DALI publishes a nominal impedance and nothing else: there is no minimum-impedance row anywhere on the Oberon sheets. That absence is the important part — a 6-ohm nominal with an undisclosed minimum could sit anywhere from 4.5 to 3 ohms, and the speaker's usual reputation as an easy load rests on measurements DALI has not published. Treat 6 Ω as the ceiling of what you know, not the floor.
Was im Datenblatt tatsächlich steht
Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.
«Maximum SPL [@ 1m] [dB] 108»
DALI gibt für einen Passivlautsprecher einen Maximalpegel an, ohne Spannung, Signal, Klirrgrenze oder Dauer zu nennen, bei der 108 dB erreicht wurden. Ein Passivlautsprecher hat keinen eigenen Maximalpegel; der Wert beschreibt eher DALIs Messbedingungen als das Produkt. Wir führen ihn nicht im rechenbaren Max-SPL-Feld, das für Aktivmonitore gedacht ist.
geprüft am 5.8.2026* Geschätzt über das Abschreibungsmodell (~72% Restwert). · geprüft am 5.8.2026