AudioChainsDB
Denon

AVR-X3900H

amplifier

$1,849

Gebrauchtmarkt: $1,330*

Datenblatt des Herstellers

Technische Daten

3 von 6 Werten mit vermerkter Quelle
Amp Type
7.1 AV Receiver·
Channels
9·
Speaker Outputs
·
Power Output Per Channel
{"thdPercent":0.08,"continuousWatts":105,"loadImpedance_ohms":8}, {"thdPercent":0.7,"continuousWatts":135,"loadImpedance_ohms":6}✓
Min Supported Impedance ohms
4✓
Updated At
2026-08-05T21:42:37.906Z·

Kommentar des Toningenieurs

Headroom Notes

Both published figures are kept because only together do they mean anything. 105 W is into 8 ohms across 20 Hz - 20 kHz at 0.08 % THD, two channels driven; 135 W is into 6 ohms at a single 1 kHz tone with nearly ten times the distortion allowance. Denon prints the same pair for every channel group - front, centre, surround, height - so this is a per-channel figure, not a sum.

Thermal Behavior

The manual permits 4 - 16 ohms, but only after a hidden service-menu step: hold ZONE2 SOURCE and STATUS for three seconds, press DIMMER twice, then select 4 or 6 ohms. Out of the box the receiver is set to '8 ohms'. Anyone who connects a 4-ohm speaker and skips that procedure is running the receiver outside the setting its own manual requires.

Was im Datenblatt tatsächlich steht

Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.

Messbedingungen
«Rated output: Front: 105 W + 105 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) / 135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)»

One amplifier, two power figures, three measurement conditions changed at once: the load drops from 8 to 6 ohms, the signal narrows from the whole audio band to a single 1 kHz tone, and the permitted distortion rises from 0.08 % to 0.7 %. Only the first figure can be compared with a full-band rating from another manufacturer.

geprüft am 5.8.2026

* Geschätzt über das Abschreibungsmodell (~72% Restwert). · geprüft am 5.8.2026