AudioChainsDB
Denon

AVR-X4800H

amplifier

$2,799

Gebrauchtmarkt: $2,015*

Datenblatt des Herstellers

Technische Daten

3 von 6 Werten mit vermerkter Quelle
Amp Type
7.1 AV Receiver·
Channels
9·
Speaker Outputs
·
Power Output Per Channel
{"thdPercent":0.05,"continuousWatts":125,"loadImpedance_ohms":8}, {"thdPercent":0.7,"continuousWatts":165,"loadImpedance_ohms":6}
Min Supported Impedance ohms
4
Updated At
2026-08-05T21:42:37.915Z·

Kommentar des Toningenieurs

Headroom Notes

125 W into 8 ohms over the full band at 0.05 % THD is the comparable number. Denon also prints a 'Dynamic power' row - 130 W x 2 into 8 ohms, 190 W x 2 into 4 ohms - and that is the only 4-ohm number this receiver has. Dynamic power is a short-burst measurement; there is no continuous 4-ohm rating anywhere in the manual, even though the manual permits 4-ohm speakers.

Was im Datenblatt tatsächlich steht

Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.

Wie eine andere Größe benannt
«Dynamic power: 130 W x 2-channel (8 Ω/ohms) / 190 W x 2-channel (4 Ω/ohms)»

This is the only figure the AVR-X4800H publishes for a 4-ohm load, and it is not a continuous rating. Dynamic power is measured with short tone bursts, so the supply and the heatsinks are never asked to hold it. Placed next to the rated output rows it reads like a 4-ohm power rating, and the receiver has none.

geprüft am 5.8.2026

* Geschätzt über das Abschreibungsmodell (~72% Restwert). · geprüft am 5.8.2026