KA15
interface_dac
$100
Gebrauchtmarkt: $60*
Technische Daten
4 von 10 Werten mit vermerkter Quelle- Type
- Dongle Adapter·
- Bus Powered
- yes·
- Max Gain dB
- 0·
- Analog Inputs
- ·
- Analog Outputs
- 3.5mm Headphones, 4.4mm Balanced Headphones·
- Digital Inputs
- USB-C·
- Min Usb Power W
- 2.5✓
- Headphone Output
- Max Power mW: 180 · Max Voltage Vrms: 2.4 · At Impedance ohms: 32 · Output Impedance ohms: 0.8·
- Max Sample Rate kHz
- 768·
- Phantom Power Provided
- no·
Kommentar des Toningenieurs
Headroom Notes
The parameter table prints one set of figures for the 3.5 mm jack and never says which power mode they belong to, although the KA15 has a Desktop Mode switch. The product page attributes the balanced 560 mW+560 mW figure to Desktop Mode, so the table is the desktop set; FiiO publishes no separate phone-powered figure for the KA15 the way it does for the KA17. Treat 2.4 V as the ceiling with a charger attached and expect less from a phone.
Amplification Warning
The 4.4 mm balanced jack is a separate amplifier (4.2 V, 560 mW into 32 ohms) with its own output impedance of 1.2 ohms. The catalogue stores one headphone output per device, so only the 3.5 mm side is modelled.
Was im Datenblatt tatsächlich steht
Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.
«Peak output voltage ≥2.4V (32Ω, THD+N<1%)»
The row is called peak output voltage, but the number is an RMS voltage: the same table rates the same jack at 180 mW into 32 ohms, and 180 mW into 32 ohms is exactly 2.4 V RMS (2.4 V peak would be 1.70 V RMS, or 90 mW). Read as a true peak, the figure would understate the device by 3 dB. FiiO uses the same row title on the BTR17 for a genuine peak-to-peak value.
geprüft am 5.8.2026* Geschätzt über das Abschreibungsmodell (~60% Restwert). · geprüft am 5.8.2026