iFi audio
GO link
interface_dac
$59
Gebrauchtmarkt: $35*
Technische Daten
3 von 10 Werten mit vermerkter Quelle- Type
- Dongle Adapter·
- Bus Powered
- yes·
- Max Gain dB
- 0·
- Analog Inputs
- ·
- Analog Outputs
- 3.5mm Headphones·
- Digital Inputs
- USB-C·
- Min Usb Power W
- 1✓
- Headphone Output
- Max Power mW: 70 · Max Voltage Vrms: 2 · At Impedance ohms: 32·
- Max Sample Rate kHz
- 384·
- Phantom Power Provided
- no·
Kommentar des Toningenieurs
Headroom Notes
iFi prints voltage and power together for each load — 1.5 V/70 mW at 32 ohms, 2 V/14 mW at 300 ohms — which is exactly what this category needs and almost nobody else does. The pair also shows where the limit is: the voltage rises by only 2.5 dB going from 32 to 300 ohms, so the GO link runs out of voltage, not current.
Amplification Warning
The specification table has an OUTPUT IMPEDANCE row and it is empty — the value is simply not published, so the field is left blank here rather than filled with a plausible number. For a 16-ohm multi-driver IEM that is the one figure you would want.
* Geschätzt über das Abschreibungsmodell (~59% Restwert). · geprüft am 5.8.2026