Reference Premiere RP-600M II
speaker
$749
Gebrauchtmarkt: $540*
Technische Daten
5 von 5 Werten mit vermerkter QuelleKommentar des Toningenieurs
Tonal Profile
High-efficiency 1" titanium LTS vented tweeter on a 90x90 Tractrix horn over a 6.5" Cerametallic woofer, crossed at 1500 Hz. By the sensitivity figure it is the easiest load in its price class to drive; by the datasheet it is also the least described, because the impedance row states compatibility rather than a measured value.
Amplification Warning
The spec sheet's row is headed 'NOMINAL IMPEDANCE' and its value is '8 Ohms Compatible'. We record 8 ohms because that is the only load figure Klipsch prints, but the sheet gives no impedance minimum, so the dip an amplifier actually sees is not published anywhere. Horn tweeters also reveal hiss from cheap sources that domes would hide.
Acoustic Characteristics
94.5 dB is the highest sensitivity in this class by about five decibels, and the asterisk on it matters: Klipsch measures half-space, which adds roughly 3 dB over the free-field figure most of the category publishes. Power handling is given as 100 W continuous / 400 W peak — what the speaker absorbs, not a recommended amplifier range.
Was im Datenblatt tatsächlich steht
Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.
«NOMINAL IMPEDANCE 8 Ohms Compatible»
Die Zeilenbezeichnung nennt eine Nennimpedanz, der Wert nennt Kompatibilität mit 8-Ohm-Ausgängen. Eine Kompatibilitätsangabe sagt nichts über die tatsächliche Last aus, und ein Impedanzminimum steht nirgends auf dem Blatt.
geprüft am 6.8.2026«*SPL at 1M, half-space anechoic with 2.83V input, in-room sensitivity»
Halbraum-Freifeld und Raumbedingungen sind zwei verschiedene Messbedingungen; die Fußnote behauptet beide für eine Zahl. Halbraum ergibt rund 3 dB mehr als das Freifeld.
geprüft am 6.8.2026Setups mit diesem Gerät
* Geschätzt über das Abschreibungsmodell (~72% Restwert). · geprüft am 6.8.2026