AudioChainsDB
Marantz

CINEMA 40

amplifier

$3,800

Gebrauchtmarkt: $2,735*

Datenblatt des Herstellers

Technische Daten

3 von 6 Werten mit vermerkter Quelle
Amp Type
7.1 AV Receiver·
Channels
9·
Speaker Outputs
·
Power Output Per Channel
{"thdPercent":0.05,"continuousWatts":125,"loadImpedance_ohms":8}, {"thdPercent":0.7,"continuousWatts":165,"loadImpedance_ohms":6}✓
Min Supported Impedance ohms
4✓
Updated At
2026-08-05T21:42:39.698Z·

Kommentar des Toningenieurs

Headroom Notes

Nine channels at 125 W into 8 ohms, full band, 0.05 % THD, two driven. For the purposes of a power calculation this receiver and the Denon AVR-X4800H are the same amplifier: every rated-output row matches, and both allow 4 - 16 ohm speakers after the same hidden impedance setting.

Was im Datenblatt tatsächlich steht

Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.

Ein Wert, mehrere Modelle
«Marantz CINEMA 40 — Rated output: Front: 125 W + 125 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) / 165 W + 165 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)»

The Denon AVR-X4800H manual prints the identical rated-output block - the same two power figures under the same two sets of conditions, and the same 4 - 16 ohm load allowance. Denon and Marantz are the same manufacturer, and for the question 'will it drive these speakers' the two receivers are not distinguishable by their published figures; the difference is in processing, HDAM circuitry and price.

geprüft am 5.8.2026

* Geschätzt über das Abschreibungsmodell (~72% Restwert). · geprüft am 5.8.2026