Dawn Pro
interface_dac
$60
Gebrauchtmarkt: $35*
Technische Daten
3 von 9 Werten mit vermerkter Quelle- Type
- Dongle Adapter·
- Bus Powered
- yes·
- Max Gain dB
- 0·
- Analog Inputs
- ·
- Analog Outputs
- 3.5mm Headphones, 4.4mm Balanced Headphones·
- Digital Inputs
- USB-C·
- Min Usb Power W
- 2.5✓
- Headphone Output
- Max Voltage Vrms: 2·
- Phantom Power Provided
- no·
Kommentar des Toningenieurs
Headroom Notes
Moondrop publishes a voltage per jack and no power at any load, so what the Dawn Pro does into 32 ohms is unknown: the 2 V figure is a no-load level and the current limit is not stated anywhere. Everything else on the sheet is measured with no load too — THD+N is qualified no load explicitly. For IEMs that is enough; for a 250-ohm headphone the missing number is the one that decides.
Was im Datenblatt tatsächlich steht
Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.
«Line Output: 4.4mm: 4Vrms / 3.5mm: 2Vrms»
The Dawn Pro has no line outputs — its only analogue sockets are the 3.5 mm and 4.4 mm headphone jacks, and the row headed Line Output describes those. No load is named, and the sheet publishes no output power at any impedance, so the figure is an unloaded level rather than a drive rating. Two other Moondrop rows on the same page do name their condition (AES17 20 kHz for noise, no load for THD+N), which makes the omission here visible.
geprüft am 5.8.2026* Geschätzt über das Abschreibungsmodell (~58% Restwert). · geprüft am 5.8.2026