NAD

C 700 V2

amplifier

$1,999

Gebrauchtmarkt: $1,440*

Datenblatt des Herstellers

Technische Daten

3 von 5 Werten mit vermerkter Quelle

Amp Type: Integrated Stereo Amp·
Channels: 2·
Speaker Outputs: ·
Power Output Per Channel: {"continuousWatts":80,"loadImpedance_ohms":8}, {"thdPercent":0.04,"continuousWatts":100,"loadImpedance_ohms":4}✓
Min Supported Impedance ohms: 4✓

Kommentar des Toningenieurs

Headroom Notes

Unlike the rest of NAD's current line the two loads get different numbers here: >80 W into 8 ohms, 100 W into 4 ohms. The distortion limit published alongside them, <0.04 %, is qualified '250mW to 90W, 4 ohms' - it is stated for the 4 ohm load only, so no distortion figure is recorded against the 8 ohm rating.

Was im Datenblatt tatsächlich steht

Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.

Messbedingungen

«Continuous output power into 8 ohms and 4 ohms | >80W / 100W (ref. 20 Hz-20 kHz at rated THD+N, both channels driven) ; THD+N (20 Hz – 20 kHz) at rated power | <0.04 % (250mW to 90W, 4 ohms)»

The power row refers to 'rated THD+N'; the row that defines rated THD+N covers 250 mW to 90 W into 4 ohms. The 8 ohm rating is 80 W, so the distortion limit that the 8 ohm number is said to be measured at is never printed for an 8 ohm load. Both numbers are the manufacturer's; the two rows simply do not describe the same load.

geprüft am 5.8.2026

* Geschätzt über das Abschreibungsmodell (~72% Restwert). · geprüft am 5.8.2026