Palmer
PAN 02
intermediate
$79
Gebrauchtmarkt: $65*
Technische Daten
2 von 7 Werten mit vermerkter Quelle- Type
- di_box·
- Added Gain dB
- -4✓
- Input Connector
- 1/4" jack (unbalanced) + parallel Thru·
- Output Connector
- 3-Pin XLR Male (transformer balanced)·
- Expert Description
- En: The active counterpart of the PAN 01, on a 1:1 transformer and a 1 Mohm input, running from a 9 V block or 48 V phantom. Palmer state the insertion loss in the product text rather than the table: a typical difference of -4 dB between in and out, which is a sixteenth of the 20 dB the passive box loses. · Uk: Активний відповідник PAN 01 на трансформаторі 1:1 із вхідним опором 1 МОм, живиться від батареї 9 В або 48 В фантомного. Втрати Palmer подає в описовому тексті, а не в таблиці: типова різниця між входом і виходом -4 дБ, тобто в шістнадцять разів менша за 20 дБ, які втрачає пасивний бокс.·
- Requires Phantom Power
- no✓
- Updated At
- 2026-08-05T23:19:35.701Z·
Was im Datenblatt tatsächlich steht
Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.
Wie eine andere Größe benannt
«Maximum output impedance with phantom power operation +10 dB.»
Impedance is measured in ohms, not decibels. The specification table on the same page lists «Max. output level + 10 dBu» and «Output impedance 600», so the +10 in this sentence is the maximum output level and the word impedance belongs to a different row.
geprüft am 6.8.2026* Geschätzt über das Abschreibungsmodell (~82% Restwert). · geprüft am 6.8.2026