3050i
speaker
$800
Gebrauchtmarkt: $575*
Technische Daten
6 von 6 Werten mit vermerkter QuelleKommentar des Toningenieurs
Headroom Notes
91 dB at 2.83 V / 1 m looks like the most sensitive speaker in this batch, and on paper it is — but on a 6-ohm nominal load 2.83 V is 1.33 W, not 1 W, so the equivalent dB/W/m figure is about 1.25 dB lower. Compared like for like against the 8-ohm KEF and B&W here, the real gap is smaller than the printed numbers suggest.
Amplification Warning
Q Acoustics does not print a nominal impedance for this speaker at all — the row is «Average Impedance: 6 Ohm», a label the company's own 5000-series pages replace with «Nominal impedance». We store 6 Ω because that is the only impedance figure offered besides the 4 Ω minimum, but an average and a nominal are not the same quantity and the sheet never says which averaging was used.
Was im Datenblatt tatsächlich steht
Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.
«Average Impedance: 6 Ohm»
Auf den 3000i-Seiten nennt Q Acoustics die Impedanz «Average Impedance», auf den 5000er-Seiten derselben Website heißt dieselbe Zeile «Nominal impedance». Die Begriffe sind nicht austauschbar: Die Nennimpedanz ist eine deklarierte Lastklasse (IEC 60268-5 koppelt sie an das gemessene Minimum), der Mittelwert ein berechneter Durchschnitt ohne offengelegte Methode.
geprüft am 5.8.2026* Geschätzt über das Abschreibungsmodell (~72% Restwert). · geprüft am 5.8.2026