5020
speaker
$700
Gebrauchtmarkt: $505*
Technische Daten
6 von 6 Werten mit vermerkter QuelleKommentar des Toningenieurs
Headroom Notes
The sensitivity row on this page contradicts itself: it is headed «Sensitivity (2.83V @ 1kHz)» and the value carries the unit «dB/w/m». Those are two different scales, and on a 6-ohm load they differ by about 1.25 dB. We have stored the figure against the drive condition that is actually named — 2.83 V — and recorded the wording, because the alternative is to silently pick a reading and be 1.25 dB out with no trace of why.
Amplification Warning
3.3 Ω minimum on a 6 Ω nominal is a genuinely demanding bookshelf load — lower than either Wharfedale in this batch and lower than the 3050i floorstander from the same brand. A receiver whose 8-ohm rating is its only rating will be delivering close to twice its specified current wherever that dip sits.
Was im Datenblatt tatsächlich steht
Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.
«Sensitivity (2.83V @ 1kHz) 87.9 dB/w/m»
Eine Zeile behauptet dreierlei, das nicht zugleich gelten kann: Ansteuerung 2,83 V, Einheit dB/W/m — und statt der Entfernung, dem «m», auf das die Einheit sich stützt, steht eine Frequenz, 1 kHz. An der auf derselben Seite genannten 6-Ohm-Last sind 2,83 V gleich 1,33 W; die beiden Lesarten von 87,9 dB unterscheiden sich also um rund 1,25 dB. Wir speichern den Wert unter 2,83 V, weil das die einzige tatsächlich genannte Messbedingung ist.
geprüft am 5.8.2026* Geschätzt über das Abschreibungsmodell (~72% Restwert). · geprüft am 5.8.2026