AudioChainsDB
Rode

NT3

microphone

$199

Gebrauchtmarkt: $155*

Datenblatt des Herstellers

Technische Daten

6 von 8 Werten mit vermerkter Quelle
Connectors
XLR 3-Pin Male·
Has Built In ADC
no·
Self Noise d BA
16
Transducer Type
Condenser True
Sensitivity dBV
-39
Output Impedance ohms
200
Phantom Power Required
no
Connection Architecture
XLR-Only

Kommentar des Toningenieurs

Tonal Profile

A three-quarter-inch externally biased cardioid - a true condenser, not an electret - with a transformerless output and a cast body. 20 Hz - 20 kHz, and it runs from a 9 V battery or P12, P24 or P48.

Gain Staging Advice

-39.0 dBV/Pa with 16 dBA of self noise: 17 dB louder than an SM57, so 30-35 dB of gain covers a close source and the preamp never gets near its noisy end. P12 support is the unusual part - it will work off portable recorders and field mixers whose phantom rail cannot reach 48 V.

Was im Datenblatt tatsächlich steht

Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.

Wie eine andere Größe benannt
«Output Impedance 200Ohm / Output Impedance 140dB SPL»

The specification list on the NT3 product page carries two rows under the same label, Output Impedance: one reads 200 ohms, the next reads 140dB SPL. The second is the maximum sound pressure level filed under the impedance heading; the NT3 data sheet prints no maximum SPL row at all. We store 200 ohms and leave maximum SPL out.

geprüft am 5.8.2026

* Geschätzt über das Abschreibungsmodell (~78% Restwert). · geprüft am 5.8.2026