sE Electronics
DM1 Dynamite
intermediate
$79
Gebrauchtmarkt: $65*
Technische Daten
3 von 7 Werten mit vermerkter Quelle- Type
- inline_booster·
- Added Gain dB
- 28✓
- Input Connector
- 3-Pin XLR Female·
- Output Connector
- 3-Pin XLR Male·
- Expert Description
- En: 28 dB from a Class-A JFET stage with a buffered output: input impedance 10 kΩ, output impedance 135 Ω, current draw 3.0 mA. The low output impedance is why the gain stays 28 dB whatever preamp follows. · Uk: 28 дБ від каскаду класу A на польових транзисторах із буферизованим виходом: вхідний опір 10 кΩ, вихідний 135 Ω, споживання 3,0 мА. Саме низький вихідний опір і тримає підсилення на 28 дБ незалежно від того, який преамп стоїть далі.·
- Provides Phantom Power
- no✓
- Requires Phantom Power
- yes✓
Kommentar des Toningenieurs
Gain Staging Advice
Output noise 9 µV (A-weighted) and max output 8.3 dBV at 0.5 % THD: with a hot source the 28 dB can push a sensitive interface input toward its own ceiling, so trim the interface, not the box.
Production Warning
The DM1 draws 48 V phantom to run and does not pass it to the microphone. sE state it directly: "not suitable for phantom-powered microphones (condenser microphones, active ribbon microphones)". Passive mics only.
* Geschätzt über das Abschreibungsmodell (~82% Restwert). · geprüft am 5.8.2026