AONIC 5
headphones
$499
Gebrauchtmarkt: $390*
Technische Daten
3 von 6 Werten mit vermerkter QuelleKommentar des Toningenieurs
Tonal Profile
Triple balanced armature, successor to the SE535. 119 dB SPL/mW at 36 Ω works out to about 133 dB/V — one of the most efficient loads any manufacturer publishes.
Amplification Warning
Two volts of output — an ordinary line-level DAC — would put roughly 139 dB SPL in the ear. You will be listening at a few tens of millivolts, which is where an amplifier's own hiss lives. Three armatures on a passive crossover also mean the impedance curve is uneven: keep source output impedance under about 4 Ω or the tonal balance moves.
Was im Datenblatt tatsächlich steht
Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.
«Sensitivity at 1 kHz — 119 dB SPL/MW»
«MW» ist im SI-System das Megawatt; gemeint ist «mW», Milliwatt. Dieselbe Großschreibung findet sich in den Anleitungen zu Aonic 3 und Aonic 4, während die Anleitungen zu SE215 und SE846 auf demselben Server die korrekte Kleinschreibung verwenden. Wir erfassen Milliwatt.
geprüft am 5.8.2026* Geschätzt über das Abschreibungsmodell (~78% Restwert). · geprüft am 5.8.2026