KSM8 Dualdyne
microphone
$439
Gebrauchtmarkt: $340*
Technische Daten
2 von 8 Werten mit vermerkter Quelle- Connectors
- XLR 3-Pin Male·
- Has Built In ADC
- no·
- Transducer Type
- Dynamic Moving Coil·
- Sensitivity dBV
- -51.5✓
- Output Impedance ohms
- 300·
- Phantom Power Required
- no·
- Connection Architecture
- XLR-Only·
- Updated At
- 2026-08-05T23:39:34.268Z·
Kommentar des Toningenieurs
Tonal Profile
A cardioid dynamic with two diaphragms: the second, undriven one sits behind the first and changes how air moves through the rear ports, which is what flattens the proximity rise. The value is in the low end staying put as the singer moves, not in the level.
Gain Staging Advice
300 ohms of source impedance is double what most handhelds present, so a preamp input below about 1.5 kilohms costs audible top end here where it would not on an SM58. And the two Shure documents disagree on how loud it is: the guide's bracketed 1.85 mV is 3.2 dB below the -51.5 dBV printed beside it.
Was im Datenblatt tatsächlich steht
Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.
«-51.5 dBV/Pa[1] (1.85 mV)»
1.85 mV/Pa is -54.7 dBV/Pa, not -51.5; -51.5 dBV/Pa is 2.66 mV/Pa. The gap is 3.2 dB. Shure's own product page for the KSM8 prints the arithmetically correct pair, '-51.50 dBV/Pa - 2.66 mV/Pa', in its machine-readable specification block - so the two Shure documents disagree, and the user guide is the one that does not add up.
geprüft am 6.8.2026* Geschätzt über das Abschreibungsmodell (~77% Restwert). · geprüft am 6.8.2026