Borea BR02
speaker
$400
Gebrauchtmarkt: $290*
Technische Daten
7 von 6 Werten mit vermerkter QuelleKommentar des Toningenieurs
Headroom Notes
Triangle labels the row «Sensitivity (dB/W/m)», so the 89 dB is already in the watt scale and needs no correction — unusual in this category, where nearly everyone quotes 2.83 V. On the declared 8-ohm nominal the two scales would coincide anyway, but the label removes the ambiguity that costs 1.25 dB on a 6-ohm rival and 3 dB on a 4-ohm one.
Amplification Warning
The nominal says 8 ohms; the minimum, printed one row below, says 3.6. For a 13 cm two-way that dip sits in the bass, where the music has most of its energy, so the amplifier meets 3.6 ohms exactly when it is working hardest. The recommended range of 15–100 W is quoted «(8 Ohms)», which is the nominal, not the load the amplifier actually sees.
Was im Datenblatt tatsächlich steht
Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.
«Nominal impedance is measured at a frequency of 1kHz - Minimum impedance is measured at low frequencies.»
Triangle definiert die Nennimpedanz als den bei 1 kHz gemessenen Wert. Das entspricht nicht der Nennimpedanz nach IEC 60268-5, die eine deklarierte Größe bezogen auf das Minimum des Impedanzbetrags im Arbeitsbereich ist. Der wahre Minimalwert steht jedoch eine Zeile darunter — dieser ist zu lesen.
geprüft am 5.8.2026* Geschätzt über das Abschreibungsmodell (~73% Restwert). · geprüft am 5.8.2026