Triton Audio
FetHead Filter
intermediate
$119
Gebrauchtmarkt: $100*
Technische Daten
3 von 8 Werten mit vermerkter Quelle- Type
- inline_booster·
- Added Gain dB
- 27✓
- Input Connector
- 3-Pin XLR Female·
- Output Connector
- 3-Pin XLR Male·
- Expert Description
- En: The standard FetHead circuit with a 6 dB/octave high-pass built in: 27 dB of gain into a 3000 Ω load, response 30 Hz to 100 kHz within 1 dB, powered from 48 V phantom which it consumes and does not pass on. The filter is fixed, not switchable, so the low end it removes is removed for every source plugged in behind it. · Uk: Звичайна схема FetHead із вбудованим фільтром 6 дБ/октаву: 27 дБ підсилення на навантаженні 3000 Ω, смуга 30 Гц — 100 кГц у межах 1 дБ, живлення від фантома 48 В, який прилад споживає й далі не пропускає. Фільтр фіксований, не перемикний, тож низ, який він прибирає, прибрано для будь-якого джерела за ним.·
- Provides Phantom Power
- no✓
- Requires Phantom Power
- yes✓
- Updated At
- 2026-08-05T22:03:05.295Z·
Kommentar des Toningenieurs
Tonal Profile
The filter is why this version exists: a ribbon in front of a kick drum or a close-miked cabinet loads the FetHead's input with subsonic energy that eats headroom before you hear it. Removing it at 6 dB/octave costs almost nothing above 100 Hz.
Production Warning
Triton say it in one sentence: the FetHead uses phantom power but does not pass it to the microphone. A condenser behind it is silent while the interface still shows +48 V engaged — the fault looks like a dead microphone and is not.
* Geschätzt über das Abschreibungsmodell (~84% Restwert). · geprüft am 5.8.2026