Diamond 12.2
speaker
$450
Gebrauchtmarkt: $325*
Technische Daten
6 von 6 Werten mit vermerkter QuelleKommentar des Toningenieurs
Headroom Notes
88 dB at 2.83 V / 1 m on an 8-ohm nominal load, so the figure doubles as dB/W/m without correction. The 12.2 is a 6.5-inch two-way in an 11.8 L cabinet: the sensitivity is honest, but the bass extension quoted at -6 dB (43 Hz) is a ported number and output falls away quickly below it.
Amplification Warning
The sheet never states a nominal impedance: the row is labelled «Nominal impedance» but the value reads «8Ω Compatible», which is a statement about amplifier outputs, not about the speaker. What is stated is the minimum, 4.0 Ω. We record 8 Ω because that is how the row is labelled, and we flag the wording separately — but size the amplifier on the 4.0.
Was im Datenblatt tatsächlich steht
Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.
«Nominal impedance 8Ω Compatible»
Die Zeile heißt «Nominal impedance», der Wert ist aber keine Impedanz: «8Ω Compatible» beschreibt, an welche Verstärkerausgänge der Lautsprecher angeschlossen werden darf. Dieselbe Seite nennt separat «Minimum impedance 4.0Ω» — und das ist die Last, die Endstufe und Schutzschaltung tatsächlich sehen.
geprüft am 5.8.2026* Geschätzt über das Abschreibungsmodell (~72% Restwert). · geprüft am 5.8.2026