Whirlwind
IMP 2
intermediate
$75
Gebrauchtmarkt: $60*
Technische Daten
2 von 8 Werten mit vermerkter Quelle- Type
- di_box·
- Added Gain dB
- -20✓
- Input Connector
- 2x 1/4" TS parallel in/thru (unbalanced)·
- Output Connector
- 3-Pin XLR Male (balanced)·
- Expert Description
- En: A passive transformer DI on Whirlwind's own TRHL transformer. One of the few makers that prints both halves of the number: an impedance ratio of 133:1 and a level change of -20 dB. · Uk: Пасивний трансформаторний директ-бокс на власному трансформаторі Whirlwind TRHL. Один із небагатьох виробників, що друкує обидві половини числа: коефіцієнт за опором 133:1 і зміна рівня -20 дБ.·
- Provides Phantom Power
- no·
- Requires Phantom Power
- no✓
- Updated At
- 2026-08-05T23:19:35.661Z·
Was im Datenblatt tatsächlich steht
Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.
Herstellerdokumente widersprechen sich
«Impedance Ratio (input to output): 133:1 … Level Change: (input to output): -20dB»
For a transformer these two rows are the same fact stated twice. An impedance ratio of 133:1 is a turns ratio of the square root of 133, about 11.5:1, which is a voltage loss of 20·log10(1/11.5) = -21.2 dB, not the -20 dB printed alongside. The 1.2 dB difference is larger than rounding. Behringer's DI600P prints the same pair and there they agree: 110:1 gives 10.49:1, that is -20.4 dB, against a printed -20 dB.
geprüft am 6.8.2026* Geschätzt über das Abschreibungsmodell (~80% Restwert). · geprüft am 6.8.2026