AudioChainsDB
Denon

AVR-X4800H

amplifier

$2,799

Used market: $2,015*

Manufacturer datasheet

Specifications

3 of 6 values have a recorded source
Amp Type
7.1 AV Receiver·
Channels
9·
Speaker Outputs
·
Power Output Per Channel
{"thdPercent":0.05,"continuousWatts":125,"loadImpedance_ohms":8}, {"thdPercent":0.7,"continuousWatts":165,"loadImpedance_ohms":6}
Min Supported Impedance ohms
4
Updated At
2026-08-05T21:42:37.915Z·

Expert Audio Engineering Commentary

Headroom Notes

125 W into 8 ohms over the full band at 0.05 % THD is the comparable number. Denon also prints a 'Dynamic power' row - 130 W x 2 into 8 ohms, 190 W x 2 into 4 ohms - and that is the only 4-ohm number this receiver has. Dynamic power is a short-burst measurement; there is no continuous 4-ohm rating anywhere in the manual, even though the manual permits 4-ohm speakers.

What the datasheet actually says

Quoted verbatim from the manufacturer’s own page, with the date we checked it. We state what is printed, not what anyone intended by it.

Named like something else
«Dynamic power: 130 W x 2-channel (8 Ω/ohms) / 190 W x 2-channel (4 Ω/ohms)»

This is the only figure the AVR-X4800H publishes for a 4-ohm load, and it is not a continuous rating. Dynamic power is measured with short tone bursts, so the supply and the heatsinks are never asked to hold it. Placed next to the rated output rows it reads like a 4-ohm power rating, and the receiver has none.

checked 8/5/2026

* Estimated with the depreciation fallback (~72% retained value). · checked on 8/5/2026