Palmer
PAN 02
intermediate
$79
Used market: $65*
Specifications
2 of 7 values have a recorded source- Type
- di_box·
- Added Gain dB
- -4✓
- Input Connector
- 1/4" jack (unbalanced) + parallel Thru·
- Output Connector
- 3-Pin XLR Male (transformer balanced)·
- Expert Description
- En: The active counterpart of the PAN 01, on a 1:1 transformer and a 1 Mohm input, running from a 9 V block or 48 V phantom. Palmer state the insertion loss in the product text rather than the table: a typical difference of -4 dB between in and out, which is a sixteenth of the 20 dB the passive box loses. · Uk: Активний відповідник PAN 01 на трансформаторі 1:1 із вхідним опором 1 МОм, живиться від батареї 9 В або 48 В фантомного. Втрати Palmer подає в описовому тексті, а не в таблиці: типова різниця між входом і виходом -4 дБ, тобто в шістнадцять разів менша за 20 дБ, які втрачає пасивний бокс.·
- Requires Phantom Power
- no✓
- Updated At
- 2026-08-05T23:19:35.701Z·
What the datasheet actually says
Quoted verbatim from the manufacturer’s own page, with the date we checked it. We state what is printed, not what anyone intended by it.
Named like something else
«Maximum output impedance with phantom power operation +10 dB.»
Impedance is measured in ohms, not decibels. The specification table on the same page lists «Max. output level + 10 dBu» and «Output impedance 600», so the +10 in this sentence is the maximum output level and the word impedance belongs to a different row.
checked 8/6/2026* Estimated with the depreciation fallback (~82% retained value). · checked on 8/6/2026