Barracuda X
headphones
$100
Gebrauchtmarkt: $80*
Technische Daten
4 von 8 Werten mit vermerkter QuelleKommentar des Toningenieurs
Tonal Profile
A wireless headset that keeps a real analogue path: the 3.5 mm cable works with the battery flat, and Razer publishes impedance and sensitivity for it. That is what puts it in this catalogue at all — a Bluetooth-only headset has its amplifier inside and the question «will the source drive it» has no meaning.
Amplification Warning
In 3.5 mm mode the dongle, the microphone processing and the on-board volume control are all out of the chain; you get the bare drivers. Level drops noticeably compared with the wireless mode, because wireless plays through the internal amplifier at a fixed, generous gain — that is a change of loudness, not of tonality.
Was im Datenblatt tatsächlich steht
Wörtlich von der Herstellerseite zitiert, mit dem Datum der Prüfung. Wir behaupten das Gedruckte, nicht die Absicht dahinter.
«Sensitivity: 96dBSPL/mW@1 kHz by HATS»
«by HATS» heißt: gemessen auf einem Kunstkopf mit Torso und Gehörgängen, nicht auf dem Flachplatten- oder IEC-60318-1-Koppler, den die meisten Datenblätter verwenden. Beide Verfahren unterscheiden sich je nach Ankopplung um mehrere Dezibel, dieser Wert ist also nicht direkt mit Angaben von Sennheiser oder beyerdynamic vergleichbar, obwohl beide in dB SPL/mW stehen. Für unseren Zweck taugt er dennoch: er stammt vom Hersteller, und sein Fehler ist klein gegenüber den 15 dB zwischen dB/mW und dB/V.
geprüft am 5.8.2026* Geschätzt über das Abschreibungsmodell (~80% Restwert). · geprüft am 5.8.2026