AT875R
microphone
$169
Used market: $130*
Specifications
2 of 9 values have a recorded sourceExpert Audio Engineering Commentary
Tonal Profile
A short shotgun cheap enough to bolt to a camera and forget: 90 Hz to 20 kHz, 80 g, and an 11-52 V phantom range that most on-camera recorders can actually supply. The 90 Hz bottom limit is not a filter, it is the microphone.
Gain Staging Advice
-30 dBV/Pa is loud for the money, but the derived 20 dB-A floor is 7 dB above an MKH 416: at boom distance in a quiet room you will hear the microphone before you hear the preamp.
What the datasheet actually says
Quoted verbatim from the manufacturer’s own page, with the date we checked it. We state what is printed, not what anyone intended by it.
«SN比(1kHz at 1Pa、A特性) 74dB»
The AT875R sheet has no equivalent-noise-level row at all - the only noise figure is a signal-to-noise ratio referred to 1 Pa. Audio-Technica prints both rows on the AT4033a and the AT4050. Since the reference is named (1 Pa = 94 dB SPL) and the weighting is named (A特性), the missing figure follows exactly: 94 − 74 = 20 dB-A. That is the number stored here.
checked 8/6/2026* Estimated with the depreciation fallback (~77% retained value). · checked on 8/6/2026