AudioChainsDB
DALI

Oberon 7

speaker

$1,600

Used market: $1,150*

Manufacturer datasheet

Specifications

6 of 5 values have a recorded source
System Type
Passive Floorstanding
Input Terminals
Binding posts
Nominal Impedance ohms
6
Recommended Power watts
Max Continuous: 180 · Min Continuous: 30
Sensitivity dB 2.83V 1m
88.5

Expert Audio Engineering Commentary

Headroom Notes

DALI labels the row «Sensitivity [2.83V/1m] [dB]», so the scale is unambiguous: 88.5 dB at 2.83 V, which on the declared 6-ohm nominal is about 87.3 dB/W/m. Two 7-inch wood-fibre woofers crossed at 2.3 kHz with no midrange driver — a two-way tower, so the woofers run in parallel across the whole bass and midrange.

Amplification Warning

No impedance minimum is published for any Oberon model. Two parallel 7-inch woofers on a 6-ohm nominal is the arrangement most likely to dip well below 4 ohms, and DALI's own recommendation tops out at 180 W. Size for 4 ohms.

What the datasheet actually says

Quoted verbatim from the manufacturer’s own page, with the date we checked it. We state what is printed, not what anyone intended by it.

Measurement conditions
«Maximum SPL [@ 1m] [dB] 110»

A passive loudspeaker has no maximum output of its own: it produces whatever the amplifier drives it to, up to thermal or excursion failure. DALI gives a maximum SPL figure without stating the drive level, the signal, the averaging interval, or the distortion limit at which it was reached, so it cannot be compared with another manufacturer's figure or used in a level calculation. Only the sensitivity and the impedance can predict level here.

checked 8/5/2026

* Estimated with the depreciation fallback (~72% retained value). · checked on 8/5/2026