AudioChainsDB
Denon

PMA-600NE

amplifier

$599

Used market: $430*

Manufacturer datasheet

Specifications

3 of 6 values have a recorded source
Amp Type
Integrated Stereo Amp·
Channels
2·
Speaker Outputs
·
Power Output Per Channel
{"thdPercent":0.07,"continuousWatts":45,"loadImpedance_ohms":8}, {"thdPercent":0.7,"continuousWatts":70,"loadImpedance_ohms":4}✓
Min Supported Impedance ohms
4✓
Release Year
2018·

Expert Audio Engineering Commentary

Headroom Notes

45 W + 45 W into 8 ohms across 20 Hz - 20 kHz at 0.07 % THD, both channels driven. The 4 ohm rating of 70 W is measured the AV-receiver way - 1 kHz, 0.7 % THD - so it is not 55 % more amplifier, it is the same amplifier measured more generously. Denon prints both in the same block, which is more than most do.

Thermal Behavior

Output terminals rated 4 - 16 ohms, and the connection page repeats it in the same words. One pair of terminals, so there is no A+B parallel trap.

* Estimated with the depreciation fallback (~72% retained value). · checked on 8/5/2026