AudioChainsDB
Neumann

U 67 Set

microphone

$7,595

Used market: $5,925*

Manufacturer datasheet

Specifications

2 of 9 values have a recorded source
Connectors
7-pin (microphone to NU 67 V power supply), XLR 3-Pin Male (power supply output)·
Has Built In ADC
no·
Self Noise d BA
17·
Transducer Type
Condenser True·
Sensitivity dBV
-32.4
Output Impedance ohms
200·
Phantom Power Required
no
Connection Architecture
XLR-Only·
Updated At
2026-08-05T23:27:57.440Z·

Expert Audio Engineering Commentary

Tonal Profile

The 1960 tube reissue, built around the EF86 and the original K67 capsule. Three patterns with three separate sensitivity and noise figures - Neumann does name which is which here, unlike on its own multi-pattern transistor models.

Gain Staging Advice

Cardioid is the loud pattern: 24 mV/Pa against 15 in omni and 16 in figure-8, i.e. switching to omni costs you 4 dB of level and 4 dB of noise floor at once. Max SPL in cardioid is only 114 dB without the pad - this is not a mic for a snare.

What the datasheet actually says

Quoted verbatim from the manufacturer’s own page, with the date we checked it. We state what is printed, not what anyone intended by it.

The maker’s own documents disagree
«Supply voltage (P48, IEC 61938) 48 V ± 4 V»

The specification table of a tube microphone carries the phantom-power row of Neumann's transistor models, while the connector row of the same table reads «Microphone: spec. 7pin, Power Supply: XLR 3 F» and the body text of the same page says the NU 67 V power supply «automatically adapts to the local mains voltage». A U 67 plugged into a P48 preamp does not work; the 48 V row describes no state this microphone has.

checked 8/6/2026

* Estimated with the depreciation fallback (~78% retained value). · checked on 8/6/2026